Setting value backup completion flag
Turning from OFF to ON 'Setting value backup command' (Y8) starts the writing of the data in the buffer memory to the non-
volatile memory. After the data writing is completed, this flag turns ON. Turning OFF 'Setting value backup command' (Y8)
also turns OFF this flag.
'Setting value backup command'
(Y8)
Execution status of Non-volatile
memory write
'Setting value backup completion flag'
(X8)
For details on the data writing to the non-volatile memory, refer to the following:
Page 123 Buffer Memory Data Backup Function
■Device No.
The following shows the device number of this input signal.
Signal name
Setting value backup completion flag
APPX
160
Appendix 2 I/O Signal
ON
OFF
Before write to
During write to
memory
memory
OFF
Executed in a program
Executed by the temperature control module
CH1 to CH4
X8
Completion of write to
memory
ON