Appendix 6
This section describes restrictions on using a temperature control module together with the remote head module.
• The inter-module link function cannot be used between the temperature control module on the master station and the
temperature control module on the intelligent device station.
• For the HOLD/CLEAR setting, refer to the following:
Page 27 HOLD/CLEAR Function
For restrictions other than the above, refer to the following:
MELSEC iQ-R CC-Link IE Field Network Remote Head Module User's Manual (Startup)
MELSEC iQ-R CC-Link IE Field Network Remote Head Module User's Manual (Application)
APPX
348
Appendix 6 Restrictions for When the Remote Head Module Is Mounted
Restrictions for When the Remote Head
Module Is Mounted