Mitsubishi Electric MELSEC iQ-R Series User Manual page 310

CH1 Feed forward value
Set the value to be added to the manipulated value (MV) in the feed forward control.
FF value is added.
Set value
(SV)
PID control
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory area name
CH Feed forward value
CH Feed forward value (in the Q compatible mode)
■Setting range
The setting range is -1000 to 1000 (-100.0 to 100.0%).
■Default value
The default value is 0 (0.0%).
APPX
308
Appendix 3 Buffer Memory Areas
Process value (PV)
Manipulated value (MV)
FF control PID control
CH1 CH2
560 760
1047 1063
CH3 CH4
960 1160
1079 1095