Network Setting On The Configuration Computer - Mitsubishi Electric NZ2GF-ETB User Manual

7.1.3

Network setting on the configuration computer

1.
Open the "Internet Protocol (TCP/IP) Properties" dialog box on the personal computer, and
configure the settings as shown below.
Control panel  "Network and Internet Connections"  "Network Connections"  "Local Area
Connection"  "General"  [Properties] button  "Internet Protocol (TCP/IP)"  [Properties] button
2.
Open the "Local Area Network (LAN) Settings" dialog box from the Web browser, and configure
the settings as shown below. If the same network settings are applied to the Ethernet adapter
module and the proxy server, the following settings are not necessary.
Web browser  [Tools]  [Internet Options]  "Connections"  [LAN settings] button
Clear the checkboxes.
CHAPTER 7 COMMUNICATION OF THE ETHERNET ADAPTER MODULE
7
71