Mitsubishi Electric MELSEC iQ-R Series User Manual page 62

1 FUNCTIONS
60
1.19 Sensor Correction Function
2.
Select the module to which the sensor
correction is executed and click the
[OK] button.
3.
Select "Sensor Correction" from the
following:
[Option]  [Sensor correction]
4.
Select a channel to which the sensor
correction is executed for "Target
Channel."
5.
Select "Normal Sensor Correction" for
"Sensor Correction Function
Selection."
6.
Input a value for "Sensor Correction"
and click the [Set Value] button.
7.
Click the [Yes] button.
8.
Click the [OK] button.
9.
To back up the correction value in the
non-volatile memory, click the
[Register] button.