Mitsubishi Electric MELSEC iQ-R Series User Manual page 272

CH1 Lower limit setting limiter
Set the lower limit value of the set value (SV).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory area name
CH Lower limit setting limiter
CH Lower limit setting limiter (in the Q compatible mode)
■Setting range
For the setting range, refer to the following:
Page 269 Setting range
■Setting unit
For the setting unit, refer to the following:
Page 269 Setting unit
■Default value
• For the R60TCTRT2TT2 and the R60TCTRT2TT2BW
The default value is 0.
• For the R60TCRT4 and the R60TCRT4BW
The default value is -2000.
APPX
270
Appendix 3 Buffer Memory Areas
CH1 CH2
512 712
56 88
CH3 CH4
912 1112
120 152