Mitsubishi Electric MELSEC iQ-R Series User Manual page 235

CH1 Manipulated value for cooling (MVc)
For details on this area, refer to the following:
Page 232 CH1 Manipulated value (MV)
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory area name
CH Manipulated value for cooling (MVc)
CH Manipulated value for cooling (MVc) (in the Q compatible mode)
CH1 Temperature rise judgment flag
This flag is for checking whether the temperature process value (PV) is within the temperature rise completion range or not.
One of the following values is stored in this area:
• 0: Out of the temperature rise completion range
• 1: Within the temperature rise completion range
When the temperature process value (PV) stays within the temperature rise completion range during the set temperature rise
completion soak time, Within temperature rise completion range (1) is stored in this buffer memory area.
Temperature
process value (PV)
Temperature rise
completion range
Set value
(SV)
(1) At this time, 'CH1 Temperature rise judgment flag' (Un\G404) is set to Within temperature rise completion range (1).
(2) 'CH1 Temperature rise completion soak time setting' (Un\G507)
Set the temperature rise completion range and the temperature rise completion soak time in the following buffer memory
areas:
• 'CH1 Temperature rise completion range setting' (Un\G506) ( Page 264 CH1 Temperature rise completion range
setting)
• 'CH1 Temperature rise completion soak time setting' (Un\G507) ( Page 265 CH1 Temperature rise completion soak
time setting)
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory area name
CH Temperature rise judgment flag
CH Temperature rise judgment flag (in the Q compatible mode)
CH1 CH2
408 608
704 705
(1)
Time
(2)
CH1 CH2
404 604
17 18
Appendix 3 Buffer Memory Areas
CH3 CH4
808 1008
706 707
CH3 CH4
804 1004
19 20
APPX
233
A