Mitsubishi Electric MELSEC iQ-R Series User Manual page 252

■Alert mode
Set the alert mode of Alert 3 in the following buffer memory area. The alert mode of Alert 3 corresponds to 'CH1 Alert set
value 3' (Un\G436).
• 'CH1 Alert 3 mode setting' (Un\G535)
■Setting range
For the setting range, refer to the following:
Page 248 Setting range
■Setting unit
For the setting unit, refer to the following:
Page 249 Setting unit
■Default value
The default value is 0.
CH1 Alert set value 4
According to a selected alert mode of Alert 4, set the temperature at which CH1 Alert 4 (Un\G401, b11) turns ON.
For 'CH1 Alert definition' (Un\G401), refer to the following:
Page 230 CH1 Alert definition
For details on the alert function, refer to the following:
Page 72 Alert Function
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory area name
CH Alert set value 4
CH Alert set value 4 (in the Q compatible mode)
■Alert mode
Set the alert mode of Alert 4 in the following buffer memory area. The alert mode of Alert 4 corresponds to 'CH1 Alert set
value 4' (Un\G437).
• 'CH1 Alert 4 mode setting' (Un\G536)
■Setting range
For the setting range, refer to the following:
Page 248 Setting range
■Setting unit
For the setting unit, refer to the following:
Page 249 Setting unit
■Default value
The default value is 0.
APPX
250
Appendix 3 Buffer Memory Areas
CH1 CH2
437 637
41 73
CH3 CH4
837 1037
105 137