Mitsubishi Electric MELSEC iQ-R Series User Manual page 322

CT1 CT input channel assignment setting
Set the assignment of each current sensor (CT) input to the channels.
■Correspondence between each CT input terminal and buffer memory address
CT input terminal
CT1
CT2
CT3
CT4
CT5
CT6
CT7
CT8
■Setting range
• 0: Not used
• 1: CH1
• 2: CH2
• 3: CH3
• 4: CH4
■Default value
The default value is Not used (0).
• When using a three-phase heater, assign the same channel to two current sensor (CT) inputs.
(MELSEC iQ-R Temperature Control Module User's Manual (Startup))
• In the heating-cooling control or position-proportional control, CH3 and CH4 cannot be assigned to this
setting.
• In the mix control, CH2 cannot be assigned to this setting.
APPX
320
Appendix 3 Buffer Memory Areas
Buffer memory address
In the R mode
2038
2039
2040
2041
2042
2043
2044
2045
In the Q compatible mode
264
265
266
267
268
269
270
271