Configuring Advanced Internet Connection; Figure 28 Wan > Internet Connection > Advanced Setup; Table 16 2Wire-2Line Service Mode - ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual

The following table describes the labels in this screen.

Table 16 2wire-2line Service Mode

LABEL
Service Type
Service Mode
Service Type
Line1 / Line 2
Enable Rate
Adaption
Transfer Max Rate
(Kbps)
Transfer Min Rate
(Kbps)
Standard Mode
Apply
Cancel
Advanced Setup

5.4.2 Configuring Advanced Internet Connection

Use this screen to edit your ZyXEL Device's advanced settings for more connections. Click
the Advanced Setup button in the Internet Connection screen. The screen appears as shown.
Figure 28 WAN > Internet Connection > Advanced Setup
P-793H User's Guide
DESCRIPTION
Select 2wire-2line mode for the DSL connection. This means that the ZyXEL
Device is going to be a server connected to two client ZyXEL Devices.
When you select 2wire-2line mode this field automatically changes to Server.
You can configure different connection rate settings for Line 1 and Line 2 DSL
connections.
Indicate whether or not the ZyXEL Device can adjust the speed of its connection
to that of the other device.
This field is enabled if Service Type is Server. Set the maximum rate at which
the ZyXEL Device sends and receives information. The actual transfer rate will
be between this value and the minimum transfer rate you configure.
This field is enabled if Service Type is Server. Set the minimum rate at which
the ZyXEL Device sends and receives information. The actual transfer rate will
be between this value and the maximum transfer rate you configure.
Select the operational mode the ZyXEL Device uses in the DSL connection.
Annex A refers to connections over POTS and Annex B refers to connections
over ISDN lines.
Click Apply to save the changes.
Click Cancel to begin configuring this screen afresh.
Click this button to display the Advanced WAN Setup screen and edit more
details of your WAN setup.
Chapter 5 WAN Setup
79