Table of Contents
Advertisement
Follow the instructions in the next table to configure Dynamic DNS parameters.
Table 93 Menu 1.1: Configure Dynamic DNS
FIELD
Service
Provider
Active
DDNSType
Host 1-3
Username
Password
Enable
Wildcard
Option
Enable Off
Line Option
IP Address
Update Policy:
DDNS Server
Auto Detect IP
Address
Use Specified
IP Address
Use IP
Address
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.
P-793H User's Guide
DESCRIPTION
This is the name of your Dynamic DNS service provider.
Press [SPACE BAR] to select Yes and then press [ENTER] to make dynamic DNS
active.
Press [SPACE BAR] and then [ENTER] to select DynamicDNS if you have the
Dynamic DNS service.
Select StaticDNS if you have the Static DNS service.
Select CustomDNS if you have the Custom DNS service.
Enter up to three host names in these fields.
Enter your user name.
Enter the password assigned to you.
Your ZyXEL Device supports DYNDNS Wildcard. Press [SPACE BAR] and then
[ENTER] to select Yes or No. This field is N/A when you choose DDNS client as your
service provider.
This field is only available when CustomDNS is selected in the DDNS Type field.
Press [SPACE BAR] and then [ENTER] to select Yes. When Yes is selected,
www.dyndns.org/
traffic is redirected to a URL that you have previously specified
(see
www.dyndns.org
for details).
You can select Yes in either the DDNS Server Auto Detect IP Address field
(recommended) or the Use Specified IP Address field, but not both.
With the DDNS Server Auto Detect IP Address and Use Specified IP Address
fields both set to No, the DDNS server automatically updates the IP address of the
host name(s) with the ZyXEL Device's WAN IP address.
DDNS does not work with a private IP address. When both fields are set to No, the
ZyXEL Device must have a public WAN IP address in order for DDNS to work.
Only select this option when there are one or more NAT routers between the ZyXEL
Device and the DDNS server. Press [SPACE BAR] to select Yes and then press
[ENTER] to have the DDNS server automatically detect and use the IP address of the
NAT router that has a public IP address.
Note: The DDNS server may not be able to detect the proper IP
address if there is an HTTP proxy server between the ZyXEL
Device and the DDNS server.
Press [SPACE BAR] to select Yes and then press [ENTER] to update the IP address
of the host name(s) to the IP address specified below.
Only select Yes if the ZyXEL Device uses or is behind a static public IP address.
Enter the static public IP address if you select Yes in the Use Specified IP Address
field.
Chapter 22 General Setup
http://
247
Advertisement
Table of Contents
Troubleshooting
