Table of Contents
Advertisement
Chapter 6 LAN Setup
Table 26 LAN > DHCP Setup (continued)
LABEL
Primary DNS Server
Secondary DNS
Server
Apply
Cancel
6.5 LAN Client List
This table allows you to assign IP addresses on the LAN to specific individual computers
based on their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
Use this screen to change your ZyXEL Device's static DHCP settings. Click Network > LAN
> Client List. The screen appears as shown.
Figure 41 LAN > Client List
The following table describes the labels in this screen.
Table 27 LAN > Client List
LABEL
IP Address
MAC Address
Add
#
Status
Host Name
IP Address
100
DESCRIPTION
This field is not available when you set DHCP to Relay.
Enter the IP addresses of the DNS servers. The DNS servers are passed to the
DHCP clients along with the IP address and the subnet mask.
If the fields are left as 0.0.0.0, the ZyXEL Device acts as a DNS proxy and
forwards the DHCP client's DNS query to the real DNS server learned through
IPCP and relays the response back to the computer.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Enter the IP address that you want to assign to the computer on your LAN with
the MAC address specified below.
The IP address should be within the range of IP addresses you specified in the
DHCP Setup for the DHCP client.
Enter the MAC address of a computer on your LAN.
Click Add to add a static DHCP entry.
This is the index number of the static IP table entry (row).
This field displays whether the client is connected to the ZyXEL Device.
This field displays the computer host name.
This field displays the IP address relative to the # field listed above.
P-793H User's Guide
Advertisement
Table of Contents
Troubleshooting
