Configuring Log Settings; Figure 125 Logs > View Log; Table 83 Logs > View Log - ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual

Chapter 18 Logs
Figure 125 Logs > View Log
The following table describes the fields in this screen.
Table 83 Logs > View Log
LABEL
Display
Email Log Now
Refresh
Clear Log
#
Time
Message
Source
Destination
Notes

18.3 Configuring Log Settings

See Section 18.1 on page 225
configure where the ZyXEL Device is to send logs; the schedule for when the ZyXEL Device
is to send the logs and which logs and/or immediate alerts the ZyXEL Device is to record. See
Section 18.1 on page 225
To change your ZyXEL Device's log settings, click Maintenance > Logs > Log Settings. The
screen appears as shown.
Alerts are e-mailed as soon as they happen. Logs may be e-mailed as soon as the log is full.
Selecting many alert and/or log categories (especially Access Control) may result in many e-
mails being sent.
226
DESCRIPTION
The categories that you select in the Log Settings screen display in the drop-down
list box.
Select a category of logs to view; select All Logs to view logs from all of the log
categories that you selected in the Log Settings page.
Click Email Log Now to send the log screen to the e-mail address specified in the
Log Settings page (make sure that you have first filled in the E-mail Log Settings
fields in Log Settings).
Click Refresh to renew the log screen.
Click Clear Log to delete all the logs.
This field displays an index number.
This field displays the time the log was recorded.
This field states the reason for the log.
This field lists the source IP address and the port number of the incoming packet.
This field lists the destination IP address and the port number of the incoming
packet.
This field displays additional information about the log entry.
for background information. Use the Log Settings screen to
for more information.
P-793H User's Guide