Figure 164 Menu 4: Applying Nat For Internet Access; Figure 165 Menu 11.3: Applying Nat To The Remote Node - ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual

Chapter 28 NAT Setup

Figure 164 Menu 4: Applying NAT for Internet Access

The following figure shows how you apply NAT to the remote node in menu 11.3.
1 Enter 11 from the main menu.
2 Enter 1 to open Menu 11.1 - Remote Node Profile.
3 Move the cursor to the Edit IP/Bridge field, press [SPACE BAR] to select Yes and
then press [ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options.

Figure 165 Menu 11.3: Applying NAT to the Remote Node

IP Options:
IP Address Assignment = Static
Rem IP Addr = 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= SUA Only
Metric= 2
Private= No
RIP Direction= Both
Multicast= None
IP Policies=
280
Menu 4 - Internet Access Setup
ISP's Name= MyISP
Encapsulation= ENET ENCAP
Multiplexing= LLC-based
VPI #= 0
VCI #= 33
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
My Login= N/A
My Password= N/A
ENET ENCAP Gateway= 0.0.0.0
IP Address Assignment= Static
IP Address= 0.0.0.0
Network Address Translation= SUA Only
Address Mapping Set= N/A
Menu 11.3 - Remote Node Network Layer Options
Address Mapping Set= N/A
Version= RIP-2B
Bridge Options:
Ethernet Addr Timeout(min)= N/A
P-793H User's Guide