Dhcp Setup; Figure 40 Lan > Dhcp Setup; Table 26 Lan > Dhcp Setup - ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual

Table 25 LAN > IP > Advanced Setup (continued)
LABEL
Apply
Cancel

6.4 DHCP Setup

Use this screen to configure the DNS server information that the ZyXEL Device sends to the
DHCP client devices on the LAN.
Figure 40 LAN > DHCP Setup
The following table describes the labels in this screen.
Table 26 LAN > DHCP Setup
LABEL
DHCP Setup
DHCP
IP Pool Starting
Address
Pool Size
Remote DHCP
Server
DNS Server
DNS Servers
Assigned by DHCP
Server
P-793H User's Guide
DESCRIPTION
Click Apply to save the changes.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Select what type of DHCP services the ZyXEL Device provides to the network.
Choices are:
None - the ZyXEL Device does not provide any DHCP services. There is
already a DHCP server on the network.
Relay - the ZyXEL Device routes DHCP requests to the DHCP server. There
may be a DHCP server on another network.
Server - the ZyXEL Device assigns IP addresses and provides subnet mask,
gateway, and DNS server information to the network. The ZyXEL Device is the
DHCP server for the network.
This field is enabled if the ZyXEL Device is a Server. Enter the first of the
contiguous addresses in the IP address pool.
This field is enabled if the ZyXEL Device is a Server. Enter the size of, or the
number of addresses in, the IP address pool.
This field is enabled if the ZyXEL Device is a Relay. Enter the IP address of the
DHCP server to which the ZyXEL Device should route requests.
The ZyXEL Device passes a DNS (Domain Name System) server IP address to
the DHCP clients.
Chapter 6 LAN Setup
99