Figure 98 Dynamic Dns > Dynamic Dns; Table 70 Dynamic Dns > Dynamic Dns - ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual

Chapter 14 Dynamic DNS Setup
Figure 98 Dynamic DNS > Dynamic DNS
The following table describes the fields in this screen.
Table 70 Dynamic DNS > Dynamic DNS
LABEL
Dynamic DNS
Setup
Active Dynamic
DNS
Service Provider
Dynamic DNS
Type
Host Name
User Name
Password
Enable Wildcard
Option
Enable off line
option
IP Address
Update Policy
Use WAN IP
Address
Dynamic DNS
server auto
detect IP
Address
192
DESCRIPTION
Select this check box to use dynamic DNS.
This is the name of your Dynamic DNS service provider.
Select the type of service that you are registered for from your Dynamic DNS
service provider.
Type the domain name assigned to your ZyXEL Device by your Dynamic DNS
provider.
You can specify up to two host names in the field separated by a comma (",").
Type your user name.
Type the password assigned to you.
Select the check box to enable DynDNS Wildcard.
This option is available when Custom DNS is selected in the DDNS Type field.
Check with your Dynamic DNS service provider to have traffic redirected to a URL
(that you can specify) while you are off line.
Select this option to update the IP address of the host name(s) to the WAN IP
address.
Select this option only when there are one or more NAT routers between the ZyXEL
Device and the DDNS server. This feature has the DDNS server automatically
detect and use the IP address of the NAT router that has a public IP address.
Note: The DDNS server may not be able to detect the proper IP
address if there is an HTTP proxy server between the ZyXEL
Device and the DDNS server.
P-793H User's Guide