ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual page 423

Table 167 ICMP Notes (continued)
TYPE CODE
0
5
0
1
2
3
8
0
11
0
1
12
0
13
0
14
0
15
0
16
0
Table 168 Syslog Logs
LOG MESSAGE
<Facility*8 + Severity>Mon dd
hr:mm:ss hostname
src="<srcIP:srcPort>"
dst="<dstIP:dstPort>"
msg="<msg>" note="<note>"
devID="<mac address last three
numbers>" cat="<category>
The following table shows RFC-2408 ISAKMP payload types that the log displays. Please
refer to the RFC for detailed information on each type.
Table 169 RFC-2408 ISAKMP Payload Types
LOG DISPLAY
SA
PROP
P-793H User's Guide
DESCRIPTION
A gateway may discard internet datagrams if it does not have the buffer space
needed to queue the datagrams for output to the next network on the route to
the destination network.
Redirect
Redirect datagrams for the Network
Redirect datagrams for the Host
Redirect datagrams for the Type of Service and Network
Redirect datagrams for the Type of Service and Host
Echo
Echo message
Time Exceeded
Time to live exceeded in transit
Fragment reassembly time exceeded
Parameter Problem
Pointer indicates the error
Timestamp
Timestamp request message
Timestamp Reply
Timestamp reply message
Information Request
Information request message
Information Reply
Information reply message
DESCRIPTION
"This message is sent by the system ("RAS" displays as
the system name if you haven't configured one) when the
router generates a syslog. The facility is defined in the web
MAIN MENU->LOGS->Log Settings page. The severity is
the log's syslog class. The definition of messages and
notes are defined in the various log charts throughout this
appendix. The "devID" is the last three characters of the
MAC address of the router's LAN port. The "cat" is the
same as the category in the router's logs.
PAYLOAD TYPE
Security Association
Proposal
Appendix I Log Descriptions
423