Log And Trace; Viewing Error Log; Figure 207 Menu 24.3: System Maintenance - Log And Trace; Figure 208 Examples Of Error And Information Messages - ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual

33.4 Log and Trace

There are two logging facilities in the ZyXEL Device. The first is the error logs and trace
records that are stored locally. The second is the UNIX syslog facility for message logging.

33.4.1 Viewing Error Log

The first place you should look for clues when something goes wrong is the error/trace log.
Follow the procedure below to view the local error/trace log:
1 Select option 24 from the main menu to open Menu 24 - System Maintenance.
2 From menu 24, select option 3 to open Menu 24.3 - System Maintenance - Log and
Trace.
3 Select the first option from Menu 24.3 - System Maintenance - Log and Trace to
display the error log in the system.
After the ZyXEL Device finishes displaying, you will have the option to clear the error log.

Figure 207 Menu 24.3: System Maintenance - Log and Trace

Examples of typical error and information messages are presented in the following figure.

Figure 208 Examples of Error and Information Messages

34 Sat Jan
35 Sat Jan
36 Sat Jan
37 Sat Jan
38 Sat Jan
39 Sat Jan
40 Sat Jan
41 Sat Jan
42 Sat Jan
43 Sat Jan
44 Sat Jan
45 Sat Jan
46 Sat Jan
47 Sat Jan
48 Sat Jan
49 Sat Jan
51 Sat Jan
52 Sat Jan
53 Sat Jan
Clear Error Log (y/n):
P-793H User's Guide
Menu 24.3 - System Maintenance - Log and Trace
1. View Error Log
2. UNIX Syslog
1 00:00:02 2000 PP05 -WARN
1 00:00:04 2000 PP00
1 00:00:06 2000 PP0c
1 00:00:06 2000 PP00 -WARN
1 00:00:06 2000 PP00
1 00:00:06 2000 PP00
1 00:00:06 2000 PP18
1 00:00:06 2000 PP19
1 00:00:06 2000 PP06
1 04:10:22 2000 PP0c
1 04:10:42 2000 PP10
1 04:10:42 2000 PP10
1 04:10:42 2000 PP00
1 04:10:44 2000 PP0c
1 04:46:08 2000 PP00
1 04:46:08 2000 PP00
1 04:46:59 2000 PP0c
1 04:58:00 2000 PP10
1 04:58:00 2000 PP10
Chapter 33 System Information & Diagnosis
SNMP TRAP 3: link up
INFO Channel 0 ok
INFO LAN promiscuous mode <0>
SNMP TRAP 0: cold start
INFO main: init completed
INFO Starting Connectivity Monitor
INFO adjtime task pause 1 day
INFO monitoring WAN connectivity
WARN MPOA Link Down
WARN netMakeChannDial: err=-3001
WARN Last errorlog repeat 18 Times
INFO SMT Password pass
INFO SMT Session Begin
WARN netMakeChannDial: err=-3001
WARN Last errorlog repeat 216 Times
INFO SMT Session End
WARN netMakeChannDial: err=-3001
WARN Last errorlog repeat 65 Times
INFO SMT Password pass
317