Chapter 3 Wizards
Figure 14 Internet Setup Wizard: ISP Parameters (PPPoE)
The following table describes the fields in this screen.
Table 8 Internet Setup Wizard: ISP Parameters (PPPoE)
LABEL
User Name
Password
Service Name
Back
Apply
Exit
This screen appears if your Internet connection uses RFC1483 encapsulation.
56
DESCRIPTION
Enter the user name exactly as your ISP assigned. If assigned a name in the form
user@domain where domain identifies a service name, then enter both components
exactly as given.
Enter the password associated with the user name above.
Type the name of your PPPoE service here. Leave this field blank if your ISP did not
provide you a PPPoE service.
Click Back to go back to the previous screen.
Click Apply to finish manual configuration.
Click Exit to close the wizard screen without saving your changes.
P-793H User's Guide