Syslog Logging; Figure 209 Menu 24.3.2: System Maintenance - Unix Syslog; Table 122 Menu 24.3.2: System Maintenance - Unix Syslog - ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual

Chapter 33 System Information & Diagnosis

33.4.2 Syslog Logging

The ZyXEL Device uses the syslog facility to log the CDR (Call Detail Record) and system
messages to a syslog server. Syslog and accounting can be configured in Menu 24.3.2 -
System Maintenance - Syslog Logging, as shown next.

Figure 209 Menu 24.3.2: System Maintenance - UNIX Syslog

You need to configure the syslog parameters described in the following table to activate syslog
then choose what you want to log.

Table 122 Menu 24.3.2: System Maintenance - UNIX Syslog

FIELD
UNIX Syslog:
Active
Syslog IP Address
Log Facility
When finished configuring this screen, press [ENTER] to confirm or [ESC] to cancel.
Your ZyXEL Device sends five types of syslog messages. Some examples (not all ZyXEL
Device specific) of these syslog messages with their message formats are shown next:
1 CDR
CDR Message Format
SdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String );
String = board xx line xx channel xx, call xx, str
board = the hardware board ID
line = the WAN ID in a board
Channel = channel ID within the WAN
call = the call reference number which starts from 1 and increments by 1 for each new call
str = C01 Outgoing Call dev xx ch xx (dev:device No. ch:channel No.)
Jul 19 11:19:27 192.168.102.2 ZyXEL: board 0 line 0 channel 0, call 1, C01 Outgoing Call dev=2
ch=0 40002
Jul 19 11:19:32 192.168.102.2 ZyXEL: board 0 line 0 channel 0, call 1, C02 OutCall Connected
64000 40002
Jul 19 11:20:06 192.168.102.2 ZyXEL: board 0 line 0 channel 0, call 1, C02 Call Terminated
318
Menu 24.3.2 - System Maintenance - UNIX Syslog
UNIX Syslog:
Active= No
Syslog IP Address= 0.0.0.0
Log Facility= Local 1
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to turn syslog on or off.
Enter the server name or IP address of the syslog server that will log the selected
categories of logs.
Press [SPACE BAR] and then [ENTER] to select a location. The log facility allows
you to log the messages to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
L02 Tunnel Connected(L2TP)
C02 OutCall Connected xxxx (means connected speed) xxxxx (means Remote Call Number)
L02 Call Terminated
C02 Call Terminated
P-793H User's Guide