ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual page 228

Chapter 18 Logs
Table 84 Logs > Log Settings
LABEL
Log Schedule
Day for Sending
Log
Time for
Sending Log
Clear log after
sending mail
Syslog Logging
Active
Syslog Server
IP Address
Log Facility
Active Log and
Alert
Log
Send Immediate
Alert
Apply
Cancel
228
DESCRIPTION
This drop-down menu is used to configure the frequency of log messages being
sent as E-mail:
Daily
Weekly
Hourly
When Log is Full
None.
If you select Weekly or Daily, specify a time of day when the E-mail should be sent.
If you select Weekly, then also specify which day of the week the E-mail should be
sent. If you select When Log is Full, an alert is sent when the log fills up. If you
select None, no log messages are sent.
Use the drop down list box to select which day of the week to send the logs.
Enter the time of the day in 24-hour format (for example 23:00 equals 11:00 pm) to
send the logs.
Select the check box to delete all the logs after the ZyXEL Device sends an E-mail
of the logs.
The ZyXEL Device sends a log to an external syslog server.
Click Active to enable syslog logging.
Enter the server name or IP address of the syslog server that will log the selected
categories of logs.
Select a location from the drop down list box. The log facility allows you to log the
messages to different files in the syslog server. Refer to the syslog server manual
for more information.
Select the categories of logs that you want to record.
Select log categories for which you want the ZyXEL Device to send E-mail alerts
immediately.
Click Apply to save your customized settings and exit this screen.
Click Cancel to return to the previously saved settings.
P-793H User's Guide