Figure 9 Status; Table 3 Status - ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual

Figure 9 Status

The following table describes the labels shown in the Status screen.

Table 3 Status

LABEL
Refresh Interval
Apply
Device Information
Host Name
Model Number
MAC Address
ZyNOS Firmware
Version
DSL Firmware
Version
WAN1/WAN2
Information
DSL Standard
IP Address
IP Subnet Mask
Default Gateway
P-793H User's Guide
DESCRIPTION
Select a number of seconds or None from the drop-down list box to refresh all
screen statistics automatically at the end of every time interval or to not refresh
the screen statistics.
Click this button to refresh the status screen statistics.
This is the System Name you enter in the Maintenance, System, General
screen. It is for identification purposes.
This is the model name of the ZyXEL Device.
This is the MAC (Media Access Control) or Ethernet address unique to your
ZyXEL Device.
This is the ZyNOS Firmware version and the date created. ZyNOS is ZyXEL's
proprietary Network Operating System design.
This is the DSL firmware version code associated with the ZyXEL Device. This is
sometimes needed by technicians to help troubleshoot problems.
If you configure a point-to-2point connection, then your WAN information is
displayed for both DSL 1 and DSL 2 connections.
This is the standard that your ZyXEL Device is using.
This is the WAN port IP address.
This is the WAN port IP subnet mask.
This is the IP address of the default gateway, if applicable.
Chapter 2 Introducing the Web Configurator
49