Advanced Backup Setup; Figure 35 Wan > Wan Backup Setup > Advanced Setup; Table 22 Wan > Wan Backup Setup > Advanced Setup - ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual

5.8.1 Advanced Backup Setup

Use this screen to change your ZyXEL Device's advanced dial backup settings. Click WAN >
WAN Backup Setup > Advanced Setup. The screen appears as shown.
Figure 35 WAN > WAN Backup Setup > Advanced Setup
The following table describes the labels in this screen.
Table 22 WAN > WAN Backup Setup > Advanced Setup
LABEL
Basic
Authentication
Type
Secondary
Phone Number
Dial Backup Port
Speed
AT Command
Initial String
P-793H User's Guide
DESCRIPTION
Use the drop-down list box to select an authentication protocol for outgoing calls.
Options are:
CHAP/PAP - Your ZyXEL Device accepts either CHAP or PAP when requested by
this remote node.
CHAP - Your ZyXEL Device accepts CHAP only.
PAP - Your ZyXEL Device accepts PAP only.
Type the backup phone number from the ISP. If the Primary Phone number is busy
or does not answer, your ZyWALL dials the Secondary Phone number, if available.
Some areas require dialing the pound sign # before the phone number for local
calls. Include a # symbol at the beginning of the phone numbers as required.
Select the speed of the connection between the Dial Backup port and the external
device. Available speeds are 9600, 19200, 38400, 57600, 115200 or 230400 bps.
Enter the AT command string to initialize the WAN device. Consult the manual of
your WAN device connected to your Dial Backup port for specific AT commands.
Chapter 5 WAN Setup
89