ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual page 113

Table 35 NAT > Address Mapping > Edit (continued)
LABEL
Local End IP
Global Start IP
Global End IP
Server Mapping
Set
Edit Details
Back
Apply
Cancel
P-793H User's Guide
Chapter 7 Network Address Translation (NAT) Screens
DESCRIPTION
This is the end local IP address (ILA). If your rule is for all local IP addresses, then
enter 0.0.0.0 as the Local Start IP address and 255.255.255.255 as the Local End
IP address.
This field is N/A for One-to-One and Server mapping types.
This is the starting global IP address (IGA). Enter 0.0.0.0 here if you have a dynamic
IP address from your ISP.
This is the ending global IP address (IGA). This field is N/A for One-to-One, Many-
to-One and Server mapping types.
Only available when Type is set to Server.
Select a number from the drop-down menu to choose a server mapping set.
Click this link to go to the Port Forwarding screen
the server mapping set that you have selected in the Server Mapping Set field.
Click Back to return to the previous screen.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
(Section 7.5 on page 108) to edit
113