Static Route Edit; Figure 91 Static Route > Static Route; Table 59 Static Route > Static Route - ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual

Chapter 12 Static Route
Figure 91 Static Route > Static Route
The following table describes the labels in this screen.
Table 59 Static Route > Static Route
LABEL
#
Active
Name
Destination
Gateway
Subnet Mask
Modify
Apply
Cancel

12.2.1 Static Route Edit

Select a static route index number and click Edit. The screen shown next appears. Use this
screen to configure the required information for a static route.
178
DESCRIPTION
This is the number of an individual static route.
This field shows whether this static route is active (Yes) or not (No).
This is the name that describes or identifies this route.
This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
This is the IP address of the gateway. The gateway is a router or switch on the same
network segment as the device's LAN or WAN port. The gateway helps forward
packets to their destinations.
This is the subnet mask of the static route.
Click the edit icon to go to the screen where you can set up a static route on the
ZyXEL Device.
Click the delete icon to remove a static route from the ZyXEL Device. A window
displays asking you to confirm that you want to delete the route.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
P-793H User's Guide