C
H A P T E R
Point-to-(2)point Configuration
This chapter introduces point-to-point and point-to-2point connections.
4.1 Point-to-point Connection Overview
You can set up point-to-point connection between two ZyXEL Devices. These connections
offer a cost-effective, high-speed connection for high-bandwidth applications such as
videoconferencing and distance learning. An example is shown below.
Figure 21 Example: Point-to-point Connection
In a point-to-point connection, the DSL ports on the ZyXEL Devices are directly connected to
each other, not to an ISP or the Internet.
A point-to-point connection can use RFC 1483 in bridge mode or ENET
ENCAP in router mode.
In a point-to-point connection, the ZyXEL Devices should use the same VPI,
VCI, multiplexing, and encapsulation method.
P-793H User's Guide
4
63