Figure 210 Menu 24.4: System Maintenance - Diagnostic
xDSL
1.
TCP/IP
12. Ping Host
The following table describes the labels in this screen.
Table 123 Menu 24.4: System Maintenance - Diagnostic
FIELD
Reset xDSL
Ping Host
Reboot System
Command Mode
Host IP Address
Enter the number of the selection you would like to perform or press [ESC] to cancel.
P-793H User's Guide
Menu 24.4 - System Maintenance - Diagnostic
Reset xDSL
Enter Menu Selection Number:
Host IP Address= N/A
DESCRIPTION
Enter 1 to reset the DSL connection on the WAN port.
Enter 12 to ping any machine (with an IP address) on your LAN or WAN.
Enter its IP address in the Host IP Address field below.
Enter 11 to reboot the ZyXEL Device.
Enter 22 to go to the Command Interpreter (CI) for further diagnosis. You can
also enter the CI using menu 24.8.
If you entered 1in the Enter Menu Selection Number field, then enter the IP
address of the computer you want to ping in this field.
Chapter 33 System Information & Diagnosis
System
21. Reboot System
22. Command Mode
321