Table of Contents
Advertisement
may be present at measurement terminals if you fail to implement all safety precautions.
• When the
RED
light on the light tower is on inside the Double-Pulse Test Rack and Safety
Enclosure, lethal voltage ( ± 1000 V dc/pulse) may appear at measurement terminals.
• Never attempt to defeat the safety interlock function of the Safety Hood.
• Do not operate the system unless another person is around the work space who is familiar with
system operation and hazards or administering first aid.
• Potential voltages less than ± 500 V may cause death under certain conditions. Therefore,
adequate preventive measures must be taken at all times!
Safety Summary
The following general safety precautions must be observed during all phases of operation, service, and
repair of this system. Failure to comply with these precautions or with specific warnings elsewhere in
this manual may impair the protections provided by the system. In addition, it violates safety standards
of design, manufacture, and intended use of the system. Keysight Technologies assumes no liability for
customer's failure to comply with these requirements.
Product manuals are available on the Web. Go to
documentation.
Hazardous voltage: System maximum output voltage may appear at the
measurement terminals inside the Safety Hood. Never attempt to bypass the safety
interlock and features of the PD1500A Double-Pulse Test system Rack and Safety
Enclosure. To avoid contact with extremely high voltages, the rack cabinet must be
operated with all side, front, and rear panels in place and the Safety Hood must
remain closed. There are no user-serviceable parts inside.
Do not intentionally modify the interlock function of the Safety Hood. While
the high voltage indicator is lit, dangerous voltage or residual charge may
appear on the measurement terminals.
Some of the material in the safety enclosure can generate static electricity. Take
care if you are using ESD sensitive devices in its vicinity.
WARNING
HIGH VOLTAGE
is used in the operation of this equipment.
LETHAL VOLTAGE on CONTACT
www.keysight.com/find/PD1500A
for all
vii
Advertisement
Table of Contents
