Scope; O Modules; Analog Output Modules; 750-562 [2 Ao 0/+-10V Dc 16 Bit] - WAGO I/O-SYSTEM 750 Manual

4 • 0BI/O Modules

Scope

1.1 Scope
This manual describes the Analog Output Module 750-562
2 AO 0/+-10V DC 16 Bit of the modular WAGO-I/O-SYSTEM 750.
Handling, assembly and start-up are described in the manual of the Fieldbus
Coupler. Therefore this documentation is valid only in the connection with the
appropriate manual.
2 I/O Modules

2.1 Analog Output Modules

2.1.1 750-562 [2 AO 0/+-10V DC 16 Bit]

2-channel analog output module, 0 ... 10 V / -10 ... +10 V DC,
16 Bit, configurable

2.1.1.1 View

Function AO 1
+Sense AO 1
-Sense AO 1
Fig. 2.1.1-1: View

2.1.1.2 General Description

The 750-562 analog output module generates output voltages in the range
from 0 ... 10 V or –10 ... +10 V for the field area.
The module has two short circuit-proof output channels and enables the direct
cabling of two 2-line actuators on the connections AO 1 and ground or AO2
and ground. The output of the signals occurs via AO 1 or AO 2.
In addition, the sense lines from 4-line actuators can be connected to the
connections Sense AO1 and +Sense AO1 or Sense AO2 and +SenseAO2.
13 14
A
C
B
Error AO 1
D
A1+ A2+
+AO 1
S1+ S2+
+24 V
S1- S2-
0 V
M M
Ground
750-562
Function AO 2
Error AO 2
Data contacts
+AO 2
+Sense AO 2
-Sense AO 2
Ground
g056200e
WAGO-I/O-SYSTEM 750
I/O Modules