O Modules; Analog Output Modules; 750-560 [2 Ao 0-10V Dc 10Bit 10Ma 24V]; View - WAGO 750 Manual

2 I/O Modules

2.1 Analog Output Modules

2.1.1 750-560 [2 AO 0-10V DC 10Bit 10mA 24V]

2-Channel Analog Output Module 0-10 V, 10 Bit, 10 mA
2.1.1.1

View

Function AO 1
Fig. 2.1.1-1: 2- Channel Analog Output Module 750-560
2.1.1.2

Description

The analog output module 750-560 creates a standardized signal of 0-10 V.
The module has two short circuit protected output channels and enables, for
example, the direct wiring of two 3-conductor actuators to the connections
AO 1, AC/DC 24 V and 0 V or AO 2, AC/DC 24 V and 0 V. The signals are
transmitted via AO 1 and AO 2.
The channels have a common ground and a common shield (screen) (S). The
shield (screen) is directly connected to the DIN rail. A capacitive connection
is made automatically when snapped onto the DIN rail.
The input signal is electrically isolated and will be transmitted with a
resolution of 10 bits.
The operational readiness and the trouble-free internal data bus
communication of the channels are indicated via a green function LED.
In addition, a red error LED will show if there are any overload ≥ 15 mA or a
short circuit to ground in either channel.
WAGO-I/O-SYSTEM 750
I/O Modules
13 14
A
C
B
Error AO 1
D
A1 A2
AO 1
M M
S
S
Shield
(screen)
750-560
750-560 [2 AO 0-10V DC 10Bit 10mA 24V]
Function AO 2
Error AO 2
Data contacts
AO 2
24 V AC/DC
0 V
Shield
(screen)
Power jumper
contacts
• 7
View
g056000e