System Administrator Settings; System Administrator Login Id; System Administrator's Password - Xerox WorkCentre 7132 User Manual

10 Setups

System Administrator Settings

This section describes the features that allow you to customize many settings on the
machine to suit your particular requirements. The machine enters the Key Operator
mode only when a correct System Administrator Login ID is entered. Before shipment,
the default System Administrator Login ID is set to "11111". The [System Administrator
Settings] screen allows you to start procedures for changing the default System
Administrator Login ID. For more information, refer to the following.
System Administrator Login ID – page 296
System Administrator's Password – page 296
Maximum Login Attempts – page 297
1.
Select [System Administrator
Settings] on the [System
Settings] screen.
2.
Select the required option.
3.
Select [Close].

System Administrator Login ID

This feature allows you to change the default System Administrator Login ID. Program
a new ID between 1 and 32 alphanumeric characters.
1.
Select [System Administrator
Login ID] on the [System
Administrator Settings] screen.
2.
Select [On].
3.
Enter a new System
Administrator ID.
Use the numeric keypad on the control panel or select [Keyboard] to display the screen
keyboard.
4.
Select [Next].
5.
Enter the same System Administrator Login ID as you entered in step 3.
6.
Select [Save].

System Administrator's Password

This feature allows you to change the default System Administrator Password.
Program a new password between 4 and 12 alphanumeric characters including
spaces.
296 Xerox WorkCentre 7132 User Guide