Creating A Seca Patient File - Seca mVSA 535 Instructions For Use Manual

Creating a seca patient file

36 •
seca mVSA 535
NOTICE!
Inconsistent measuring results
If you create seca patient files several times, this can lead to incorrect
assignment of measuring results and falsify the analysis.
► If there is no seca patient file on the device for a patient, check
whether there is already a seca patient file in the
PC software.
► If a seca patient file for this patient exists in the
PC software, check the synchronization settings ➔
automatic synchronization.
► Only create a new seca patient file on the device if you are sure that
there is no seca patient file for the patient in the
PC software.
1. Log in ➔
Logging in.
2. Press the Patient tab.
The patient list is displayed.
3. Press the Create patient file button.
NOTICE!
Restricted function
If you press the Anonymous patient field, the first input screen is
skipped and an anonymous patient file is created. It is not possible to
display any measured value graphs (histories) in anonymous patient
files.
seca analytics 115
seca analytics 115
Activating
seca analytics 115