Erase Running-Configuration - ZyXEL Communications GS1920v2 Series User Manual

The following table describes the labels in this screen.
Table 164 Management > Maintenance
L ABEL
Current
Firmware
Upgrade
Restore
Configuration
Backup
Configuration
Erase Running-
Configuration
Save
Configuration
Reboot System
Tech-Support
39.2.1 Era se Running - C o nfig ura tio n
Follow the steps below to reset the Switch back to the Zyxel default configuration settings.
In the
1 Ma inte na nc e
Switch configuration information you configured and return to the Zyxel default configuration settings.
Click to reset all Switch configurations to the Zyxel default configuration settings.
2
O K
Fig ure 246
Chapter 39 Maintenance
DESC RIPT IO N
This field displays which configuration (
on the Switch.
Click to go to the
C lic k He re
Click to go to the
C lic k He re
Click to go to the
C lic k He re
Click to reset the configuration to the Zyxel default configuration settings.
C lic k He re
Click to save the current configuration settings to
C o nfig 1
Click to save the current configuration settings to
C o nfig 2
Click
C usto m De fa ult
Switch. This file can be used instead of the Zyxel factory default configuration file.
Click to reboot the Switch and load
C o nfig 1
Click to reboot the Switch and load
C o nfig 2
Click
Fa c to ry De fa ult
settings on the Switch.
Click
C usto m De fa ult
Switch.
Note: Make sure to click the
current configuration on the Switch.
Click to see the Tech-Support screen. You can set CPU and memory thresholds for
C lic k He re
log reports and download related log reports for issue analysis. Log reports include CPU history
and utilization, crash and memory.
screen, click the
Erase Running-Configuration: Confirmation
GS1920v2 Series User's Guide
C o nfig ura tio n 1
Firm wa re Upg ra de
Re sto re C o nfig ura tio n
Ba c kup C o nfig ura tio n
to save the current configuration settings to a custom default file on the
C o nfig ura tio n 1
C o nfig ura tio n 2
to reboot the Switch and load the Zyxel factory default configuration
to reboot the Switch and load the last-saved custom default file on the
button in any screen to save your settings to the
Sa ve
button next to
C lic k He re
340
or ) is currently operating
C o nfig ura tio n 2
screen.
screen.
screen.
on the Switch.
C o nfig ura tio n 1
on the Switch.
C o nfig ura tio n 2
on the Switch.
on the Switch.
Era se Running - C o nfig ura tio n
to clear all