ZyXEL Communications GS1920v2 Series User Manual page 59

Initial Setup Example: Management IP Address
Fig ure 37
Connect your computer to any Ethernet port on the Switch. Make sure your computer is in the same
1
subnet as the Switch.
Open your web browser and enter 192.168.1.1 (the default IP address) in the address bar to access the
2
web configurator. See
Click >
3
Ba sic Se tting
panel.
Configure the related fields in the
4
For the network, enter 192.168.2.1 as the IP
5
VL AN2
address and 255.255.255.0 as the subnet mask.
In the field, enter the ID of the VLAN group to
6
VID
which you want this management IP address to
belong. This is the same as the VLAN ID you
configure in the
Sta tic VL AN
Click to save your changes back to the run-
7 Add
time memory. Settings in the run-time memory are
lost when the Switch's power is turned off.
Chapter 5 Initial Setup Example
Section 4.2 on page 44
in the navigation
IP Se tup
screen.
IP Se tup
screen.
GS1920v2 Series User's Guide
59
for more information.