ZyXEL Communications GS1920v2 Series User Manual page 282

Advanced Application > Private VLAN
Fig ure 203
The following table describes the labels in this screen.
Table 129 Advanced Application > Private VLAN
L ABEL DESC RIPT IO N
Active Check this box to enable private VLAN in a VLAN.
Name Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.
VLAN ID Enter a VLAN ID from 1 to 4094. This is the VLAN to which this rule applies.
Promiscuous Ports Enter the number of the port(s) that can communicate with any ports in the same VLAN. Other
ports belonging to this VLAN will be added to the isolation list and can only send and receive
traffic from the port(s) you specify here.
Add Click
Add
run-time memory. The Switch loses these changes if it is turned off or loses power, so use the
link on the top navigation panel to save your changes to the non-volatile memory when
Sa ve
you are done configuring.
Cancel Click
C a nc e l
Clear Click
C le a r
Index This is the index number of the rule.
Active This shows whether this rule is activated or not.
Name This is the descriptive name for this rule.
VLAN This is the VLAN to which this rule is applied.
Promiscuous Ports This shows the port(s) that can communicate with any ports in the same VLAN.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete Check the rule(s) that you want to remove and then click the
Cancel Click
C a nc e l
Chapter 31 Private VLAN
to insert the entry in the summary table below and save your changes to the Switch's
to reset the fields to your previous configuration.
to clear the fields to the factory defaults.
to clear the check boxes.
GS1920v2 Series User's Guide
282
button.
De le te