Igmp Snooping - ZyXEL Communications GS1920v2 Series User Manual

The following table describes the labels in this screen.
Table 81 Advanced Application > Multicast > IPv4 Multicast
L ABEL
Index
VID
Port
Multicast Group
24.3.1 IG MP Sno o ping
Click the
IG MP Sno o ping
the screen as shown. See
Fig ure 148
The following table describes the labels in this screen.
Table 82 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping
L ABEL

IGMP Snooping

Active
Querier
Chapter 24 Multicast
DESC RIPT IO N
This is the index number of the entry.
This field displays the multicast VLAN ID.
This field displays the port number that belongs to the multicast group.
This field displays IP multicast group addresses.
link in the
Adva nc e d Applic a tio n > Multic a st > IPv4 Multic a st
Section 24.1 on page 201
Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping
DESC RIPT IO N
Use these settings to configure IGMP snooping.
Select to enable IGMP Snooping to forward group multicast traffic only to ports that
Ac tive
are members of that group.
Select this option to allow the Switch to send IGMP General Query messages to the VLANs with
the multicast hosts attached.
GS1920v2 Series User's Guide
for more information on multicasting.
206
screen to display