ZyXEL Communications GS1920v2 Series User Manual page 370

Table 183 Management > Diagnostic (continued)
L ABEL DESC RIPT IO N
Cable length This displays the total length of the Ethernet cable that is connected to the port when the
Pa ir sta tus
This shows
This shows
Distance to This displays the distance between the port and the location where the cable is open or
fault
shorted.
This shows
This shows
Locator LED Enter a time interval (in minutes) and click
between several devices in a rack.
The default time interval is 30 minutes.
Click
Chapter 41 Diagnostic
is and the Switch chipset supports this feature.
O k
if the is
N/ A Pa ir sta tus
if the Switch chipset does not support to show the cable length.
Unsuppo rte d
if the is
N/ A Pa ir sta tus
if the Switch chipset does not support to show the distance.
Unsuppo rte d
to have the Switch terminate the blinking locater LED.
Sto p
GS1920v2 Series User's Guide
370
or . Check the
O pe n Sho rt Dista nc e to fa ult
.
O k
to show the actual location of the Switch
Blink
.