Arp Setup; Arp Learning - ZyXEL Communications GS1920v2 Series User Manual

Therefore in the following example, the Switch can learn host
sent by host
address and ICMP reply.
38.2 ARP Se tup
Click
IP Applic a tio n
next to
ARP L e a rning
IP Application > ARP Setup
Fig ure 243
38.2.1 ARP L e a rning
Use this screen to configure each port's ARP learning mode. Click the link next to
Applic a tio n
Chapter 38 ARP Setup
. The Switch then forwards host
A
> in the navigation panel to display the screen as shown. Click the link
ARP Se tup
to open a screen where you can set the ARP learning mode for each port.
> screen to display the screen as shown next.
ARP Se tup
GS1920v2 Series User's Guide
's MAC address from the ARP request
A
's ICMP reply to host
B A
337
right after getting host 's MAC
B
ARP L e a rning
in the
IP