ZyXEL Communications GS1920v2 Series User Manual page 296

Table 136 Advanced Application > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail (Dot1
and Dot3 TLV)
L ABEL DESC RIPT IO N
Vlan Name TLV This shows the VLAN ID and name for remote device port.
• VL AN ID
• VL AN Na m e
Protocol The Protocol Identity TLV allows the Switch to advertise the particular protocols that are
Identity TLV
accessible through its port.
Dot3 TLV
MAC PHY The MAC/PHY Configuration/Status TLV advertises the bit-rate and duplex capability of the
Configuration &
sending 802.3 node. It also advertises the current duplex and bit-rating of the sending node.
Status TLV
Lastly, it advertises whether these setting were the result of auto-negotiation during link
initiation or manual override.
•
AN Suppo rte d
•
AN Ena b le d
•
AN Adve rtise d C a pa b ility
•
O pe r MAU T ype
Link The Link Aggregation TLV indicates whether the link is capable of being aggregated,
Aggregation
whether the link is currently in an aggregation, and if in an aggregation, the port
TLV
identification of the aggregation.
•
Ag g re g a tio n C a pa b ility
•
Ag g re g a tio n Sta tus
•
Ag g re g a tio n Po rt ID
Power Via MDI The Power Via MDI TLV allows network management to advertise and discover the MDI
TLV
power support capabilities of the sending port on the remote device.
• Po rt C la ss
• MDI Suppo rte d
• MDI Ena b le d
• Pa ir C o ntro la b le
• PSE Po we r Pa irs
• Po we r C la ss
Max Frame Size This displays the maximum supported frame size in octets.
TLV
- Displays if the port supports or does not support auto-negotiation.
- The current auto-negotiation status of the port.
- The auto-negotiation capabilities of the port.
- The current Medium Attachment Unit (MAU) type of the port
- The current aggregation capability of the port.
- The current aggregation status of the port.
- The aggregation ID of the current port.
GS1920v2 Series User's Guide
296