ZyXEL Communications GS1920v2 Series User Manual page 76

Table 12 Status > Neighbor
L ABEL DESC RIPT IO N
Model This shows the model name of the neighbor device. This field will show "
devices.
System Name This shows the system name of the neighbor device.
Location This shows the geographic location of the neighbor device.
Firmware This shows the firmware version of the neighbor device. This field will show "
devices.
IP This shows the IP address of the neighbor device. The IP address is a
can click to log into and manage the neighbor device through its web configurator. This
field will show "
MAC This shows the MAC address of the neighbor device. This field will show "
devices.
PWR Cycle Click the
again. A count down button (from 5 to 0) starts.
Note:
•
•
Reset to Default Click the
warning message "
you to confirm the action. After confirming the action a count down button (from 5 to 0)
starts.
Note:
•
•
•
Chapter 7 Status and ZON
" for non-Zyxel devices.
-
button to turn OFF the power of the neighbor device and turn it back ON
C yc le
The Switch must support power sourcing (PSE) or the network device is a powered
device (PD).
If multiple neighbor devices use the same port, the
the first device, others will show "
button to reset the neighbor device to its factory default settings. A
Re se t
Are yo u sure yo u wa nt to lo a d fa c to ry de fa ult?
The Switch must support power sourcing (PSE) or the network device is a powered
device (PD).
If multiple neighbor devices use the same port, the
will show " " instead.
-
You can only reset Zyxel products.
GS1920v2 Series User's Guide
76
button is displayed only on
C yc le
" instead.
-
button is not available and
Re se t
" for non-Zyxel
-
" for non-Zyxel
-
that you
hype r link
" for non-Zyxel
-
" appears prompting