Dhcp Relay Tutorial Introduction; Creating A Vlan - ZyXEL Communications GS1920v2 Series User Manual

6.3.1 DHC P Re la y T uto ria l Intro duc tio n
In this example, you have configured your DHCP server (192.168.2.3) and want to have it assign a
specific IP address (say 172.16.1.18) to DHCP client
number in the DHCP request. Client
Tutorial: DHCP Relay Scenario
Fig ure 45
6.3.2 C re a ting a VL AN
Follow the steps below to configure port 2 as a member of VLAN 102.
Access the web configurator through the Switch's management port.
1
Go to
2 Ba sic Se tting
the run-time memory.
Tutorial: Set VLAN Type to 802.1Q
Fig ure 46
Chapter 6 Tutorials
connects to the Switch's port 2 in VLAN 102.
A
> and set the VLAN type to
Switc h Se tup
GS1920v2 Series User's Guide
based on the system name, VLAN ID and port
A
. Click
802.1Q
64
to save the settings to
Apply