Nebula Center Control Discovery; Nebula Switch Registration - ZyXEL Communications GS1920v2 Series User Manual

This screen displays links to
the NCC (Nebula Control Center) and to
the Switch's serial number and MAC address for handy registration of the Switch at NCC.
Click
Ba sic Se tting
Basic Setting > Cloud Management
Fig ure 80
8.12.1 Ne b ula C e nte r C o ntro l Disc o ve ry
Click
Ba sic Se tting
Basic Setting > Cloud Management > Nebula Center Control Discovery
Fig ure 81
Select
Ac tive
registered in the NCC, it will go into cloud management mode.
In cloud management mode, then NCC will first check if the firmware on the Switch needs to be
upgraded. If it does, the Switch will upgrade the firmware immediately. If the firmware doesn't need to
be upgraded, but there is newer firmware available for the Switch, then it will be upgraded according
to the firmware upgrade schedule for the Switch on the NCC. Below is the process for upgrading
firmware:
Download firmware via the NCC
1
Upgrade the firmware and reboot.
2
Note: While the Switch is rebooting, don't turn off the power.
Clear
Ac tive
standalone mode. See
8.12.2 Ne b ula Switc h Re g istra tio n
Click
Ba sic Se tting
Chapter 8 Basic Setting
Ne b ula C e nte r C o ntro l Disc o ve ry
>
C lo ud Ma na g e m e nt
>
C lo ud Ma na g e m e nt > Ne b ula C e nte r C o ntro l Disc o ve ry
to turn on NCC discovery on the Switch. If the Switch has Internet access and has been
to turn off NCC discovery on the Switch. The Switch will not discover the NCC and remain in
Section 1.1.1 on page 20
>
C lo ud Ma na g e m e nt > Ne b ula Switc h Re g istra tio n
GS1920v2 Series User's Guide
where you can have the Switch search for
Ne b ula Switc h Re g istra tio n
in the navigation panel to display this screen.
for more information.
105
which has a QR code containing
to display this screen.
to display this screen.