ZyXEL Communications GS1920v2 Series User Manual page 113

Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup
Fig ure 88
The following table describes the related labels in this screen.
Table 38 Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup
L ABEL DESC RIPT IO N
ACTIVE Select this check box to activate the VLAN settings.
Name Enter a descriptive name for the VLAN group for identification purposes. This name consists of up
to 64 printable characters. Spaces are allowed.
VLAN Group ID Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
Port The port number identifies the port you are configuring.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Control Select
No rm a l
selection.
Select
Fixe d
Select
Fo rb idde n
Tagging Select
T X T a g g ing
Group ID.
Chapter 9 VLAN
for the port to dynamically join this VLAN group using GVRP. This is the default
for the port to be a permanent member of this VLAN group.
if you want to prohibit the port from joining this VLAN group.
if you want the port to tag all outgoing frames transmitted with this VLAN
GS1920v2 Series User's Guide
113