Pppoe Ia Per-Port - ZyXEL Communications GS1920v2 Series User Manual

Table 120 Advanced Application > PPPoE > Intermediate Agent (continued)
L ABEL
Apply
Cancel
29.3.1 PPPo E IA Pe r- Po rt
Use this screen to specify whether individual ports are trusted or untrusted ports and have the Switch
add extra information to PPPoE discovery packets from PPPoE clients on a per-port basis.
Note: The Switch will drop all PPPoE packets if you enable the PPPoE Intermediate Agent on
the Switch and there are no trusted ports.
Click the
Po rt
Fig ure 194
The following table describes the labels in this screen.
Table 121 Advanced Application > PPPoE > Intermediate Agent > Port
L ABEL
Port
*
DESC RIPT IO N
Click to save your changes to the Switch's run-time memory. The Switch loses these
Apply
changes if it is turned off or loses power, so use the
your changes to the non-volatile memory when you are done configuring.
Click to begin configuring this screen afresh.
C a nc e l
link in the
Inte rm e dia te Ag e nt
Advanced Application > PPPoE > Intermediate Agent > Port
DESC RIPT IO N
This field displays the port number.
Use this row to make the setting the same for all ports. Use this row first and then make
adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
GS1920v2 Series User's Guide
Chapter 29 PPPoE
screen to display the screen as shown.
270
link on the top navigation panel to save
Sa ve