Configure Rapid Spanning Tree Protocol - ZyXEL Communications GS1920v2 Series User Manual

The following table describes the labels in this screen.
Table 50 Advanced Application > Spanning Tree Protocol > Configuration
L ABEL
Spanning Tree
Mode
Apply
Cancel
13.4 C o nfig ure Ra pid Spa nning T re e Pro to c o l
Use this screen to configure RSTP settings, see
Click in the
RST P
Advanced Application > Spanning Tree Protocol > RSTP
Fig ure 108
Chapter 13 Spanning Tree Protocol
DESC RIPT IO N
You can activate one of the STP modes on the Switch.
Select
Ra pid Spa nning T re e
Section 13.1 on page 135
Click to save your changes to the Switch's run-time memory. The Switch loses these
Apply
changes if it is turned off or loses power, so use the
save your changes to the non-volatile memory when you are done configuring.
Click to begin configuring this screen afresh.
C a nc e l
>
Adva nc e d Applic a tio n
GS1920v2 Series User's Guide
,
Multiple Ra pid Spa nning T re e
for background information on STP.
Sa ve
Section 13.1 on page 135
screen.
Spa nning T re e Pro to c o l
139
or . See
Multiple Spa nning T re e
link on the top navigation panel to
for more information on RSTP.