Lldp Local Port Status Detail - ZyXEL Communications GS1920v2 Series User Manual

8/24/48-port gbe smart managed switch
Hide thumbs Also See for GS1920v2 Series:
Table of Contents

Advertisement

The following table describes the labels in this screen.
Table 132 Advanced Application > LLDP > LLDP Local Status
L ABEL
Basic TLV
Chassis ID TLV
System Name
TLV
System
Description TLV
System
Capabilities TLV
Management
Address TLV
LLDP Port
Information
Local Port
Port ID Subtype
Port ID
Port Description
33.4.1 L L DP L o c a l Po rt Sta tus De ta il
This screen displays detailed LLDP status for each port on this Switch. Click
> L L DP L o c a l Sta tus
screen as shown next.
Chapter 33 Link Layer Discovery Protocol (LLDP)
DESC RIPT IO N
This displays the chassis ID of the local Switch, that is the Switch you're configuring. The
chassis ID is identified by the chassis ID subtype.
- this displays how the chassis of the Switch is identified.
C ha ssis ID Sub type
- This displays the chassis ID of the local Switch.
C ha ssis ID
This shows the host name of the Switch.
This shows the firmware version of the Switch.
This shows the System Capabilities enabled and supported on the local Switch.
Syste m C a pa b ilitie s Suppo rte d
Syste m C a pa b ilitie s Ena b le d
The Management Address TLV identifies an address associated with the local LLDP agent
that may be used to reach higher layer entities to assist discovery by network management.
The TLV may also include the system interface number and an object identifier (OID) that are
associated with this management address
This field displays the Management Address settings on the specified port(s).
Ma na g e m e nt Addre ss Sub type
Inte rfa c e Num b e r Sub type
- 0 (not supported)
Inte rfa c e Num b e r
- 0 (not supported)
O b je c t Ide ntifie r
This displays the local port information.
This displays the number of the Switch port which receives the LLDPDU from the remote
device. Click a port number to view the detailed LLDP status on this port at
screen.
Sta tus De ta il
This indicates how the port ID field is identified.
This is an alpha-numeric string that contains the specific identifier for the port from which this
LLDPDU was transmitted.
This shows the port description that the Switch will advertise from this port.
and then, click a port number, for example 1 in the local port column to display the
GS1920v2 Series User's Guide
289
- Bridge
- Bridge
- ipv4 / all-802
- unknown
L L DP L o c a l Po rt
>
Adva nc e d Applic a tio n
L L DP

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents