ZyXEL Communications GS1920v2 Series User Manual page 65

Click
3
Adva nc e d Applic a tio n
In the screen, select
4 Sta tic VL AN
field and enter 102 in the
Select to configure port 2 to be a permanent member of this VLAN.
5 Fixe d
Clear the
6 T X T a g g ing
Click to save the settings to the run-time memory. Settings in the run-time memory are lost when the
7
Add
Switch's power is turned off.
Tutorial: Create a Static VLAN
Fig ure 47
Click the
8
VL AN C o nfig ura tio n
screen.
VL AN C o nfig ura tio n
Tutorial: Click the VLAN Port Setting Link
Fig ure 48
Enter 102 in the
9 PVID
that the frames are forwarded to the VLAN group that the tag defines.
10 Click to save your changes back to the run-time memory.
Apply
Chapter 6 Tutorials
> >
VL AN VL AN C o nfig ura tio n
, enter a descriptive name (VLAN 102 for example) in the
AC T IVE
field.
VL AN G ro up ID
check box to set the Switch to remove VLAN tags before sending.
link in the
Sta tic VL AN Se tup
field for port 2 to add a tag to incoming untagged frames received on that port so
GS1920v2 Series User's Guide
65
> .
Sta tic VL AN Se tup
screen and then the
VL AN Po rt Se tup
Na m e
link in the