Link Aggregation Setting - ZyXEL Communications GS1920v2 Series User Manual

The following table describes the labels in this screen.
Table 63 Advanced Application > Link Aggregation Status
L ABEL
Group ID
Enabled Ports
Synchronized
Ports
Aggregator ID
Criteria
Status
17.3 L ink Ag g re g a tio n Se tting
Click
Adva nc e d Applic a tio n
next. See Section 17.1 on page 162
Chapter 17 Link Aggregation
DESC RIPT IO N
This field displays the group ID to identify a trunk group, that is, one logical link containing multiple
ports.
These are the ports you have configured in the
The port number(s) displays only when this trunk group is activated and there is a port belonging
to this group.
These are the ports that are currently transmitting data as one logical link in this trunk group.
Link Aggregator ID consists of the following: system priority, MAC address, key, port priority and
port number. Refer to Link Aggregation ID on page 163
The ID displays only when there is a port belonging to this trunk group and LACP is also enabled
for this group.
This shows the outgoing traffic distribution algorithm used in this trunk group. Packets from the
same source and/or to the same destination are sent over the same link within the trunk.
means the Switch distributes traffic based on the packet's source MAC address.
src - m a c
means the Switch distributes traffic based on the packet's destination MAC address.
dst- m a c
means the Switch distributes traffic based on a combination of the packet's source
src - dst- m a c
and destination MAC addresses.
means the Switch distributes traffic based on the packet's source IP address.
src - ip
means the Switch distributes traffic based on the packet's destination IP address.
dst- ip
means the Switch distributes traffic based on a combination of the packet's source
src - dst- ip
and destination IP addresses.
This field displays how these ports were added to the trunk group. It displays:
• - if the ports are configured as static members of a trunk group.
Sta tic
• - if the ports are configured to join a trunk group via LACP.
L AC P
>
L ink Ag g re g a tio n > L ink Ag g re g a tio n Se tting
for more information on link aggregation.
GS1920v2 Series User's Guide
L ink Ag g re g a tio n
for more information on this field.
164
screen to be in the trunk group.
to display the screen shown