ZyXEL Communications GS1920v2 Series User Manual page 315

Table 147 Advanced Application > OAM > OAM Remote Loopback (continued)
L ABEL DESC RIPT IO N
Packet Size Define the allowable packet size of the loopback test frames.
Test Click
T e st
Remote
Loopback
Mode
Port Enter the number of the port from which the Switch sends loopback control PDUs to initiate or
terminate a remote-loopack test.
Start Click
Sta rt
Loopback Control PDUs to the remote device.
Stop Click
Sto p
Loopback Control PDUs to the remote device.
Chapter 34 OAM
to begin the test.
to initiate a remote-loopback test from the specified port by sending Enable
to terminate a remote-loopback test from the specified port by sending Disable
GS1920v2 Series User's Guide
315