ZyXEL Communications GS1920v2 Series User Manual page 305

Chapter 33 Link Layer Discovery Protocol (LLDP)
Advanced Application > LLDP > LLDP-MED Location
Fig ure 219
The following table describes the labels in this screen.
Table 143 Advanced Application > LLDP > LLDP-MED Location
L ABEL DESC RIPT IO N
Port Enter the port number you want to set up the location within the LLDP-MED network.
Location The LLDP-MED uses geographical coordinates and Civic Address to set the location
Coordinates information of the remote device. Geographical based coordinates includes latitude,
longitude, altitude and datum. Civic Address includes Country, State, County, City, Street
and other related information.
Latitude Enter the latitude information. The value should be from 0º to 90º. The negative value
represents the South.
• no rth
• so uth
Longitude Enter the longitude information. The value should be from 0º to 180º. The negative value
represents the West.
• we st
• e a st
GS1920v2 Series User's Guide
305